Leak fuel tank
Printed From: rsvr.net Forums
Category: Tuono
Forum Name: General & Technical
Forum Description: Everything and anything to do with the Terrific Tuono... the ultimate Streetfigher!
URL: http://www.rsvr.net/forum_posts.asp?TID=30331
Printed Date: 26 Mar 2026 at 23:09
Software Version: Web Wiz Forums 12.07 - https://www.webwizforums.com
Topic: Leak fuel tank
Posted By: bullitt1964
Subject: Leak fuel tank
Date Posted: 13 Mar 2026 at 14:59
|
Hi guys bought a metal 99 fuel tank for my 2005 tuono had it resprayed and put decals on fits lovely put some fuel in to check for leaks minute pin hole leak🤬. Is this repairable or has anyone tried these resins you swirl around tank . The tank inside didn't look that rusty,think I'm going to be out of biking for a while any help and advice greatly appreciated many thanks dave
|
Replies:
Posted By: Spoonz
Date Posted: 13 Mar 2026 at 15:06
| Personally I wouldn’t trust any kind of sealer long term. Maybe take it to a fabricator and ask what they can do without the heat damaging the paint too much or distorting the metal. Maybe brazing or something. |
Posted By: bullitt1964
Date Posted: 14 Mar 2026 at 07:25
|
Thanks for reply, I'm going to ask at a metal fabricator monday see what they suggest cheers dave
|
Posted By: bullitt1964
Date Posted: 14 Mar 2026 at 08:54
|
Does anyone have a fuel pump flange base,I had to drill through the overflow pipes on mine to fit the overflow pipes i got from ap is it possible to plug these so I can use my plastic tank for now cheers dave
|
Posted By: Spoonz
Date Posted: 14 Mar 2026 at 18:20
| The overflow, likely vents the tank so if you block it your tank may have a problem venting vapour/pressure as fuel expands or the level changes etc. |
Posted By: redratbike
Date Posted: 14 Mar 2026 at 18:56
Or some fuel proof hose with bungsand clips -------------  |
bullitt1964 wrote:Posted By: bullitt1964
Date Posted: 14 Mar 2026 at 23:20
| Thanks for reply guys will bung vents and let you know what happens about metal tank cheers dave |
Posted By: bullitt1964
Date Posted: 17 Mar 2026 at 17:31
|
Hi guys have had the tank done at fabricator near me took it in morning picked it up a couple of hours later Looks good what they've done he tried to keep minimal damage to paint thanks for advice
|
Posted By: redratbike
Date Posted: 17 Mar 2026 at 17:32
|
Good news Where was it leaking at the front ? ------------- |
Posted By: bullitt1964
Date Posted: 17 Mar 2026 at 18:08
|
Posted By: bullitt1964
Date Posted: 17 Mar 2026 at 18:12
|
Looks a nice job only charged me £20 thanks again for reply It's taking me ages get this pic on here lol |
Posted By: bullitt1964
Date Posted: 17 Mar 2026 at 18:26
|
Posted By: bullitt1964
Date Posted: 17 Mar 2026 at 18:28
Here's what it looked like a small pin hole would have thought the guys spraying it would have noticed hopefully fixed now
|
Posted By: redratbike
Date Posted: 19 Mar 2026 at 20:02
|
Nice job ------------- |
Posted By: bullitt1964
Date Posted: 20 Mar 2026 at 04:50
|
đź‘Ťgoing to see what they'll do about paint I don't reckon they'll need to spray whole tank again surely hope not
|