Smart and brown type L

It comes with the following    3 Jaw Chuck (6") + set inside jaws

4 Jaw Chuck (6") needs suitable back plate

Collet Chuck = following collets

IMP 3/32, 1/8, 5/32, 11/64, 7/32, 1/4, 5/16, 3/8, 1/2, 5/8, 23/32.

MET 2, 5, 6, 7, 8, 9, 10, 12, 15

No2 morse taper and fixed centre.

Fixed tailstock centre No.1 morse taper

Running tailstock centre         ,,

Drill chuck for tailstock           ,,

Some tooling.

There is some minor backlash in the cross slide but this has not prevented accurate work, feed divisions are 0.001". It runs smoothly throughout its range, it has a 1HP single phase motor, the suds pump is 3phase but wired for single phase although I have never used it preferring the oily brush method of lubrication.

The following items are with it:-

1 x spare 3 jaw chuck

1 x 4 jaw chuck

2 x sets of external jaws for 3 jaw chucks.

1 x set parallel jaws

1 x taper turning attachment (I have never used)

1 x Turret (I have never used)

1 x fixed steady

1 x spare tool holder

1 x running centre

1 x half point centre

1 x Driving plate

Change wheels for alternative threads