Dual height inlet stacks
Printed From: rsvr.net Forums
Category: Tuono
Forum Name: General & Technical
Forum Description: Everything and anything to do with the Terrific Tuono... the ultimate Streetfigher!
URL: http://www.rsvr.net/forum_posts.asp?TID=28951
Printed Date: 27 Feb 2021 at 07:00
Software Version: Web Wiz Forums 12.03 - http://www.webwizforums.com
Topic: Dual height inlet stacks
Posted By: greenman1966
Subject: Dual height inlet stacks
Date Posted: 01 Dec 2020 at 08:20
|
Has anyone tried making these. https://www.thingiverse.com/thing:3742217%20" rel="nofollow - https://www.thingiverse.com/thing:3742217
I printed some today in pla+, they're for 51 mm throttle bodies. They came out ok, so I've got some petg on order to make a proper set to trial. Dennis
|
Replies:
Posted By: 426hemi
Date Posted: 01 Dec 2020 at 08:28
| The link doesn’t work but stepicenti has been making dual height stacks for quite a while now. |
Posted By: redratbike
Date Posted: 01 Dec 2020 at 08:40
|
Yes lots of people jumped on the back of stepisenti although people were making theses with standard parts a long time before Ensure your plastic is petrol resistant as some spray back make determinate them and could fail and get sucked in the motor -------------  www.apriliaperformance.co.uk www.apriliaforum.co.uk www.apriliaownersclub.co.uk |
Posted By: redratbike
Date Posted: 01 Dec 2020 at 08:50
|
Oh and they work too!!! ------------- www.apriliaperformance.co.uk www.apriliaforum.co.uk www.apriliaownersclub.co.uk |
Posted By: Colly
Date Posted: 01 Dec 2020 at 11:51
Mate of mine took is stacks out,wheelie machine 
|
Posted By: tfcoulson
Date Posted: 01 Dec 2020 at 16:28
| https://www.thingiverse.com/thing:3742217" rel="nofollow - https://www.thingiverse.com/thing:3742217 |
Posted By: camngetit
Date Posted: 09 Dec 2020 at 21:27
|
Why does it make it all bottom end power
------------- its twins for me !!!! www.apriliaperformance.co.uk www.apriliaforum.co.uk www.apriliaownersclub.co.uk |
Posted By: Colly
Date Posted: 10 Dec 2020 at 01:13
|
After seeing my mates bike go when were both out together on the same bikes,im defo taking mine out
|
Posted By: Hangry
Date Posted: 10 Dec 2020 at 17:12
Always thought that shorter stacks more top end longer more bottom or mid range.iv got the carbon dual stacks and can say they are very good in both areas 
|
Posted By: greenman1966
Date Posted: 16 Dec 2020 at 19:35
|
I went for a good test ride last night and now it will pull a higher gear. 6th is good to go from 4000 rpm onwards, sometimes even as low as 3500, whereas before 6th was more of an overdrive gear and I never used it. Now I'm riding a wave of torque in any gear, it doesn't bog or suddenly come on the power, it just pulls. Very linear. Great improvement. Yes, I've already got a modified collector, mille air boot, standard filter and airbox, Gabro chip.
|