Print Page | Close Window

Zorsts

Printed From: rsvr.net Forums
Category: Tuono
Forum Name: General & Technical
Forum Description: Everything and anything to do with the Terrific Tuono... the ultimate Streetfigher!
URL: http://www.rsvr.net/forum_posts.asp?TID=27190
Printed Date: 28 Mar 2024 at 18:21
Software Version: Web Wiz Forums 12.03 - http://www.webwizforums.com


Topic: Zorsts
Posted By: Hangry
Subject: Zorsts
Date Posted: 17 Sep 2018 at 12:03
hey peeps.
Probably silly question but I'm full of themWink.
Mite have the opertunity to buy a smalt full system would it be OK to use without a dyno tune? Or is it better to get all the gear fisrst.gen2 map2.
Appreciate any thoughts.



Replies:
Posted By: 426hemi
Date Posted: 17 Sep 2018 at 14:27
Better to get all the gear first really unless you want multiple dyno sessions, unless you buy a pc5 with auto tune.


Posted By: Hangry
Date Posted: 17 Sep 2018 at 15:07
cheers hemi thought so just wondered if it would run OK till I got pc5.or will run like crap popping n farting not that that's a bad thing lol.


Posted By: blacklines
Date Posted: 17 Sep 2018 at 15:21
It's really not that hard to get fueling in ballpark by ear really. At least on gen 1 anyway. Might be a little bit of trial and error but you should easy be able to get a nice smooth on/off throttle response and decent enough fuelling throughout the rev range without a dyno. Not perfect though but definitely good enough.



Posted By: Spoonz
Date Posted: 17 Sep 2018 at 15:35
Originally posted by blacklines blacklines wrote:

It's really not that hard to get fueling in ballpark by ear really. At least on gen 1 anyway. Might be a little bit of trial and error but you should easy be able to get a nice smooth on/off throttle response and decent enough fuelling throughout the rev range without a dyno. Not perfect though but definitely good enough.
 
Gen2 has no trimmers only bypass screws, so you can only balance the Tb's. He can't do anything more than that in this case.

It will run fine on variant 2 though, just might won't be as good as it can be.


Posted By: Hangry
Date Posted: 17 Sep 2018 at 19:48
cheers guys for reply's and spooz that's what I wanted to hear cuz
I know when I get them I can't see me leaving them in a box till I get money for pc5 n dyno lol could set them up in lounge n just stair at them tho Big smile


Posted By: Hangry
Date Posted: 17 Sep 2018 at 21:18
I'm going to push the buy button I think tomorrow 
Going to use money I keped back for a morepower carbon fuel tank don't think anything happening with them and the old girl deserves a prezzie.


Posted By: 426hemi
Date Posted: 17 Sep 2018 at 21:50
He's making the gen 1.5 carbon tanks now.


Posted By: Hangry
Date Posted: 17 Sep 2018 at 22:04
lol I take it what u call the falco? 
They are nice tho, the tank that is.


Posted By: apriliapista
Date Posted: 17 Sep 2018 at 22:08
whereโ€™s the tread for carbon tanks?
If someone doing for  GenI then Iโ€™m in!


Posted By: 426hemi
Date Posted: 17 Sep 2018 at 22:17
He's doing gen1.5 rsv or tuono tanks.


Posted By: Hangry
Date Posted: 17 Sep 2018 at 22:18
go in technical chat mate he was getting names n numbers to make it viable.gen1 and 2s nearly got there close but no cigar at mo 
He's done a load of falco ones stunning is all I can say.
He also put me strait when I said carbon tanks arnt ethnol proof witch I had read somewhere Angry


Posted By: Hangry
Date Posted: 17 Sep 2018 at 22:24
I know he's doing falco tanks hemi.well it's in the falco chat.


Posted By: Hangry
Date Posted: 18 Sep 2018 at 21:10
hey another silly question Wink
Didn't get around to ordering today.anyway gaskets for the smalts  Are they standard oem or do I order the ones on there website. So just want to get it write.


Posted By: wigginsjp
Date Posted: 18 Sep 2018 at 21:24
std ones are fine no issue. The bore is bigger in the pipe work but the flanges remain the same to fit the heads 

-------------
Aprilia RSVR Factory 2007 V2 1060cc Big Bore
Aprilia RSVR Factory 2004 Race Bike
Kawasaki ZX10R 2007 Race Bike
Aprilia Tuono V4 1100 Factory 2020
www.apriliaperformance.co.uk
www.apworkshops.co.uk


Posted By: Hangry
Date Posted: 18 Sep 2018 at 22:48
ideal thanks for that
Have you got a set or have you installed them before? If so what you think
Of them Big smile


Posted By: Hangry
Date Posted: 19 Sep 2018 at 16:02
well I done it Clap
Confirmed order full sysrem carbon ends Tongue


Posted By: wigginsjp
Date Posted: 19 Sep 2018 at 22:17
Originally posted by Hangry Hangry wrote:

ideal thanks for that
Have you got a set or have you installed them before? If so what you think
Of them Big smile

I've a full system and overall I'm very happy though I had some initial fitting issues. Big power increase and nice sound. Not intrusive at all with a nice distinctive sound. Some service delays so make sure you keep in touch but was some reasons given over supplier difficulties. Don't bother to ceramic coat from them use a local to you over here if you want that done as I did. 

Enjoy ๐Ÿ‘๐Ÿป


-------------
Aprilia RSVR Factory 2007 V2 1060cc Big Bore
Aprilia RSVR Factory 2004 Race Bike
Kawasaki ZX10R 2007 Race Bike
Aprilia Tuono V4 1100 Factory 2020
www.apriliaperformance.co.uk
www.apworkshops.co.uk


Posted By: Hangry
Date Posted: 19 Sep 2018 at 22:30
I did have a problem with PayPal lol but konstantine emailed me strait back and sorted it.think I red about ceramic issue on hear a wile back mite of been you, so I ordered without coating can't wait.was wondering weather to coat in and out or just inside and wrap the front and rear? 


Posted By: Hangry
Date Posted: 21 Sep 2018 at 16:14
another silly one lol.
Is there a map for the evo exhaust? I'm on Map2 but been going through various old chat on other forums (soz) can't believe I'm askin this I should know better by nowSleepy but if there is ill have it checked out for my smalts.soz in advance my head going wild again Star


Posted By: redratbike
Date Posted: 21 Sep 2018 at 16:52
ask M9rko he had Aprilia Evo6 map uploaded for the evo6 system but unsure f it was any good 

-------------


www.apriliaperformance.co.uk
www.apriliaforum.co.uk
www.apriliaownersclub.co.uk


Posted By: Hangry
Date Posted: 21 Sep 2018 at 20:02
cheers red.getting a bit wose for wear at mo soz 
How do ask him or do I just wait.just want best fueling till I get a pc5 n map mate LOL


Posted By: badapple
Date Posted: 21 Sep 2018 at 20:12
Originally posted by Hangry Hangry wrote:

well I done it Clap
Confirmed order full sysrem carbon ends Tongue
VERY JEALOUS!


-------------
I started out with nothing and I've still got most of it left


Posted By: Hangry
Date Posted: 21 Sep 2018 at 20:16
thanks mate can't believe it myself lol
Haven't talk missus yet lol think I'm gunna pay for this ten fold lol 


Posted By: wigginsjp
Date Posted: 22 Sep 2018 at 15:55
Originally posted by Hangry Hangry wrote:

I did have a problem with PayPal lol but konstantine emailed me strait back and sorted it.think I red about ceramic issue on hear a wile back mite of been you, so I ordered without coating can't wait.was wondering weather to coat in and out or just inside and wrap the front and rear? 

Yeah probably was me ๐Ÿ˜‚

Coating is better especially as there is little clearance on the rear header to the shock. So close in fact I'd be surprised wrap would squeeze in! 


-------------
Aprilia RSVR Factory 2007 V2 1060cc Big Bore
Aprilia RSVR Factory 2004 Race Bike
Kawasaki ZX10R 2007 Race Bike
Aprilia Tuono V4 1100 Factory 2020
www.apriliaperformance.co.uk
www.apworkshops.co.uk


Posted By: Hangry
Date Posted: 22 Sep 2018 at 17:47
OK thanks bud, coating it will beWink


Posted By: Hangry
Date Posted: 14 Oct 2018 at 11:39
hey wiggins can I ask how you did the small dent for side stand? On the smalts thanks.


Posted By: Hangry
Date Posted: 13 Dec 2018 at 11:55
hey peeps hope all well.
Headers arrived lol taken a wile n still waiting on mufflers, WOW these things are scary looking LOL oh and got myself a 77 400 smoker for a blast forgot how fun they are Wink


Posted By: badapple
Date Posted: 13 Dec 2018 at 17:25
was wondering if you had got it sorted yet buddy stick some pics up once its all fitted, and of the smokerWink

-------------
I started out with nothing and I've still got most of it left


Posted By: Hangry
Date Posted: 13 Dec 2018 at 18:11
lol Yeh taken bloody ages and still haven't got the cans yet, but what I have got is awesome.love to put up some pics but haven't clue how to lol I'm naff with all that stuff.


Posted By: 426hemi
Date Posted: 13 Dec 2018 at 18:15
When you click on the post reply you see an icon of a tree with an arrow on it click it and it comes up choose file, press it and you can select which photos to upload.


Posted By: Hangry
Date Posted: 13 Dec 2018 at 18:34
just tried that n it's giving me pics of beach and stuff lol
I'm only on a phone if that makes a difference. 


Posted By: Hangry
Date Posted: 13 Dec 2018 at 19:54
No can't do it lol I'm a no1 numpty hehe Hug



Print Page | Close Window

Forum Software by Web Wiz Forums® version 12.03 - http://www.webwizforums.com
Copyright ©2001-2019 Web Wiz Ltd. - https://www.webwiz.net