FAQ Register Login |
Gen 2 oem Ecu map revisions |
Post Reply |
Author | |
Spoonz
Admins Group Joined: 11 Feb 2008 Location: North Devon Status: Offline Points: 10726 |
Post Options
Thanks(0)
Posted: 23 Jan 2015 at 10:56 |
software for early 04-RSVR with three wire timing sensor, AXONE ≥ 5.0.4
-664582 was the first generation map, ran poorly when switched to map-2 -664584 (file VD5G684$.BIX) first update and worked very well (first available with AXONE 5.0.2) -664586 (file VD5G68B$.BIX) same as the map shipped with 2005 bikes -664588 (file VD5G68Z$.BIX) map specifically to work with the EVO-6 race only pipe software for later 04-RSVR with two wire timing sensor and 05-RSVR, AXONE ≥ 5.0.4 -664583 (file VD5L683$.BIX) same as 664584, originally installed in the later 04 bikes -664585 (file VD5L68A$.BIX) same as 664586, originally installed in the 2005 bikes -664587 (file VD5L68X$.BIX) same as 664588, for use with EVO-6 pipe software for 06-09 RSVR, requires AXONE ≥ 5.0.6 -266536 (file VD5L980$.BIX) originally installed, no updates currently available -266538 (file VD5L981$.BIX) for use with EVO-6 pipe software for 06-Tuono (US 07), requires AXONE ≥ 5.0.6 -266531 original map shipped with early production, had issues with throttle response -266532 (file VC5L980$.BIX) is the first update software for the 07- 09 Tuono (US 07.5), requires AXONE ≥ 5.1.1 -266533 (file VC5L981$.BIX) original map shipped -266534 (file VC5L982$.BIX) for use with EVO-6 pipe |
|
Kamm Matt
World Superbike Star Joined: 03 Dec 2014 Location: ASIA Status: Offline Points: 208 |
Post Options
Thanks(0)
|
664586 (file VD5G68B$.BIX)
how to i get this software.. hihi.. as axone dealer in here only 1 tuner.. but not sure either he has this software or not
|
|
http://mibc.proboards.com/
|
|
Spoonz
Admins Group Joined: 11 Feb 2008 Location: North Devon Status: Offline Points: 10726 |
Post Options
Thanks(0)
|
The Axone can download the files directly from the Aprilia dealer system. The Axone is programmed with the dealer code etc which allows access. Even if you owned an Axone, without a dealer code you can't get the maps so it either has to be done via a dealer or an ex dealer Axone which has them downloaded already. |
|
Kamm Matt
World Superbike Star Joined: 03 Dec 2014 Location: ASIA Status: Offline Points: 208 |
Post Options
Thanks(0)
|
yesterday sent mine 1st gen rsv 1000r factory 2004 to get update on mapping..
for a years.. mine bike runs really well on -664583 (file VD5L683$.BIX) (aprilia hardware 385 466 000) (revision number = 4c) both cyl pressure was equal 616-666 - + with full system akra.. so mechanic using piaggio navigator.. updated to -664586 (file VD5G68B$.BIX) but my siemes VDO ecu rejected to load this version.. why i cant load this mapping? after that mechanic upload new mapping to the -664585 (file VD5L68A$.BIX) revision number = 4c but mine bike runs not really clear.. seems it didnt like the new mapping.. sometime it jerking.. and really lazy on mid rpm.. charging system in sudden shows below 12.3v.. before get changed.. just fine 13.4v.. will send back soon to change the mapping cyl pressure is front (1002) rear (702) currently. |
|
http://mibc.proboards.com/
|
|
Spoonz
Admins Group Joined: 11 Feb 2008 Location: North Devon Status: Offline Points: 10726 |
Post Options
Thanks(0)
|
664586 is not compatible with a 2 wire pickup from the flywheel which is what you must have if you had 664583 originally. The chart in my first post shows which work with each pickup type and shows 664586 is for a 3 wire pickup only The axone will not allow you to load an incompatible map.
Throttle bodies should be balanced after each map change regardless if they were right before and maps have no connection with charging voltage. That must be a seperate issue and probably along with the cylinder balance why it is running poorly.
|
|
Kamm Matt
World Superbike Star Joined: 03 Dec 2014 Location: ASIA Status: Offline Points: 208 |
Post Options
Thanks(0)
|
Oem mapping n setup |
|
http://mibc.proboards.com/
|
|
Kamm Matt
World Superbike Star Joined: 03 Dec 2014 Location: ASIA Status: Offline Points: 208 |
Post Options
Thanks(0)
|
|
|
http://mibc.proboards.com/
|
|
Kamm Matt
World Superbike Star Joined: 03 Dec 2014 Location: ASIA Status: Offline Points: 208 |
Post Options
Thanks(0)
|
New mapping |
|
http://mibc.proboards.com/
|
|
Kamm Matt
World Superbike Star Joined: 03 Dec 2014 Location: ASIA Status: Offline Points: 208 |
Post Options
Thanks(0)
|
sorry for the photos above that didnt appear.. here's oem mapping and it setup.. here's new mapping. |
|
http://mibc.proboards.com/
|
|
Kamm Matt
World Superbike Star Joined: 03 Dec 2014 Location: ASIA Status: Offline Points: 208 |
Post Options
Thanks(0)
|
i'm going to balancing my TB.. and can i use this type gas analyser?
|
|
http://mibc.proboards.com/
|
|
Kamm Matt
World Superbike Star Joined: 03 Dec 2014 Location: ASIA Status: Offline Points: 208 |
Post Options
Thanks(0)
|
|
|
http://mibc.proboards.com/
|
|
Spoonz
Admins Group Joined: 11 Feb 2008 Location: North Devon Status: Offline Points: 10726 |
Post Options
Thanks(0)
|
Yes but you will need some take off pipes for the headers. A probe up the exhaust won't work for balancing on a shared collector system.
|
|
Kamm Matt
World Superbike Star Joined: 03 Dec 2014 Location: ASIA Status: Offline Points: 208 |
Post Options
Thanks(0)
|
Guys wanna ask more hehe..
Is there anyone in here know how to switch to engine variant map2 for RSVR Gen2 by using PADS software? What tab/button need to click? Thank you |
|
http://mibc.proboards.com/
|
|
Post Reply | |
Tweet |
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |