FAQ Register Login |
Ohlin fork seals |
Post Reply | Page 12> |
Author | |
RSVR P
L Plates Joined: 17 May 2009 Status: Offline Points: 9 |
Post Options
Thanks(0)
Posted: 03 Oct 2009 at 09:21 |
Has anyone any tips on replacement fork seals on a 05 RSVR factory? I've heard of fitting Suzuki seals as an (cheaper?) alternative, if so which ones and is there any advantage at all or do I just stick to original parts? Cheers for any info?
|
|
Spoonz
Admins Group Joined: 11 Feb 2008 Location: North Devon Status: Offline Points: 10726 |
Post Options
Thanks(0)
|
Suzuki K4 seals. Double lipped instead of single as per Ohlins. (and a lot cheaper)
|
|
RSVR P
L Plates Joined: 17 May 2009 Status: Offline Points: 9 |
Post Options
Thanks(0)
|
Many thanks
|
|
andy777
Moto GP Alien Joined: 12 Aug 2008 Location: berks Status: Offline Points: 522 |
Post Options
Thanks(0)
|
The seals are cheap anyway, aren't they? I was told its the stantion thats are not made to the same tolerances as the jap ones that causes the leaks.
Andy
|
|
monkeeman
Moto2 racer Joined: 11 Feb 2008 Location: Bristol Status: Offline Points: 125 |
Post Options
Thanks(0)
|
I replaced my seals with k4 GSXR1000 ones a couple of years ago and they're still going strong 8000 miles later, mine also gets stood for months over winter without a problem, this is what really destroys the ohlins ones and the suzuki ones are fine.
As for cost, ohlins ones are £50, OE suzuki £14. Have a look at this old thread for more info http://forum.rsvr.net/forum_posts.asp?TID=1979&KW=k4&PID=12051&title=forking-hell#12051 Edited by monkeeman - 06 Oct 2009 at 09:16 |
|
RSVR P
L Plates Joined: 17 May 2009 Status: Offline Points: 9 |
Post Options
Thanks(0)
|
Nice one, cheers. |
|
andy777
Moto GP Alien Joined: 12 Aug 2008 Location: berks Status: Offline Points: 522 |
Post Options
Thanks(0)
|
£50 quid!!!!!!!!!!!!!!!!!!!
I only pay £100 to get both forks serviced at an ohlins center. that includes all seals a few o rings clips etc and oil. Plus the labour for the guy to do it Andy
|
|
dynodave
Moto3 racer Joined: 14 Oct 2009 Location: Staffordshire Status: Offline Points: 13 |
Post Options
Thanks(0)
|
Where was that? I need to replace mine.
|
|
andy777
Moto GP Alien Joined: 12 Aug 2008 Location: berks Status: Offline Points: 522 |
Post Options
Thanks(0)
|
PDQ motorcycles in Taplow near slough just off the M4
Bit far for you though Edited by andy777 - 22 Oct 2009 at 18:29 |
|
samurai sy
Moto3 racer Joined: 13 Mar 2010 Location: Bristol Status: Offline Points: 26 |
Post Options
Thanks(0)
|
I have a PDF on how to change the forks seals on ohlins forks, I also have a front and rear ohlins manual if anyone wants it? I bought a disc off ebay with some useful/useless information on it depending on your point of view
Edited by samurai sy - 22 Mar 2010 at 01:37 |
|
camngetit
Premium Member Joined: 28 May 2009 Location: nottingham uk Status: Offline Points: 1440 |
Post Options
Thanks(0)
|
griff has the latest ohlins seals in which are double lipped and less than £50 for the seals.fitting is more
|
|
its twins for me !!!!
www.apriliaperformance.co.uk www.apriliaforum.co.uk www.apriliaownersclub.co.uk |
|
rossi46
Moto3 racer Joined: 03 Dec 2014 Location: KENT Status: Offline Points: 11 |
Post Options
Thanks(0)
|
Try a seal mate first as its cured my leaking seal and only cost £ 6 on eBay . Look at the vid on YouTube got nothing to lose by trying it .
|
|
GARY OBRIEN
|
|
Kamm Matt
World Superbike Star Joined: 03 Dec 2014 Location: ASIA Status: Offline Points: 208 |
Post Options
Thanks(0)
|
get a yam r1 SE 2006 edition fork seal.. as that r1 se use ohlins fork too
|
|
http://mibc.proboards.com/
|
|
CarsOrBikes
World Superbike Star Joined: 23 Aug 2014 Location: Wirral Status: Offline Points: 230 |
Post Options
Thanks(0)
|
There are some stories that 'other make' seals contribute to premature coating wear, if true then the extra for genuine is the long term way forward, also if they aren't cleaned out properly perhaps expect to do them again fairly soon?
|
|
Guests
Guest Group |
Post Options
Thanks(0)
|
I have had suzuki ones in mine for years never any problems.
You may get problem on high mileage bikes maybe but probably done half its life with gsxr ones in no problems so far. The R1 in post above a good bet aswell |
|
Careca
World Superbike Star Joined: 30 Dec 2015 Location: Sevenoaks Status: Offline Points: 269 |
Post Options
Thanks(0)
|
Without question try a sealmate first. I have found there is nothing wrong with the seal. Its crap that gets trapped under the seal and makes it leak . If you get it in time the seal mate removes the crap and hey presto it seals again. Certainly worked for me twice.
It really does work ...! Regards, Nat.
|
|
Jambon
Moto2 racer Joined: 21 Sep 2018 Location: Bedfordshire Status: Offline Points: 154 |
Post Options
Thanks(0)
|
Just thought I'd resurrect this thread... Does anyone have a link to the correct k4 GSXR1000 seals? I know AP stock the Ohlins ones for £47, which seems pricey, but could be convinced if it's the 'right' thing to do.
|
|
IanG
Premium Member Joined: 04 Oct 2010 Location: N Wales Status: Offline Points: 10725 |
Post Options
Thanks(0)
|
Do yourself a favour and swerve both the tight Gixxer ones and even the later twin lip Ohlins and splash out a bit on the super slippery green SKF units if you can find them. Virtually does away with any stiction ? in the forks and seal like champs
|
|
www.apworkshops.co.uk
www.apriliaforum.co.uk www.apriliaownersclub.co.uk Looking forward to the next track day |
|
badapple
Premium Member Joined: 03 Nov 2014 Location: Norwich United Kingdom Status: Offline Points: 5608 |
Post Options
Thanks(0)
|
If you want Ohlins seals I have a brand new set that I bought but never fitted. Got them from AP I'll take 35 posted?
|
|
I started out with nothing and I've still got most of it left
|
|
Spoonz
Admins Group Joined: 11 Feb 2008 Location: North Devon Status: Offline Points: 10726 |
Post Options
Thanks(0)
|
I would avoid Suzuki seals if you like your nitride coating to survive. You can buy the ohlins seals from Yamaha for less than ape prices. Just order seals for an R1 sp which has ohlins forks.
|
|
Jambon
Moto2 racer Joined: 21 Sep 2018 Location: Bedfordshire Status: Offline Points: 154 |
Post Options
Thanks(0)
|
I love this place, thanks for the quick replies. Will scour the web for SKF seals although a quick search looks like it could be hard. If I have no luck I'll hit you up badapple! Cheers guys
|
|
badapple
Premium Member Joined: 03 Nov 2014 Location: Norwich United Kingdom Status: Offline Points: 5608 |
Post Options
Thanks(0)
|
No worries
|
|
I started out with nothing and I've still got most of it left
|
|
CarsOrBikes
World Superbike Star Joined: 23 Aug 2014 Location: Wirral Status: Offline Points: 230 |
Post Options
Thanks(0)
|
I think mine came from Brooks Barn iirc which weren't too expensive, and the oil may have been poor...
|
|
Jambon
Moto2 racer Joined: 21 Sep 2018 Location: Bedfordshire Status: Offline Points: 154 |
Post Options
Thanks(0)
|
Thanks a lot. Any idea of the part number? Looking for ones for Ohlins forks from a gen 2 RSV Factory.
|
|
IanG
Premium Member Joined: 04 Oct 2010 Location: N Wales Status: Offline Points: 10725 |
Post Options
Thanks(0)
|
And British main stockist |
|
www.apworkshops.co.uk
www.apriliaforum.co.uk www.apriliaownersclub.co.uk Looking forward to the next track day |
|
Jambon
Moto2 racer Joined: 21 Sep 2018 Location: Bedfordshire Status: Offline Points: 154 |
Post Options
Thanks(0)
|
Amazing thanks for this! Watched that video earlier this morning actually, very interesting.
|
|
2000r1
Premium Member Joined: 11 Feb 2008 Status: Offline Points: 157 |
Post Options
Thanks(0)
|
Fitted loads of these to RSV’s including my own, a damn sight cheaper than Aprilia too.
|
|
Tifa
Moto GP Alien I am Sparticus, only uglier Joined: 21 Apr 2009 Status: Offline Points: 1972 |
Post Options
Thanks(0)
|
I used SKF in mine. Whereas the genuine (and pattern) Showa seals would sometimes fail and leak (Bushings replaced, stanchions reground even) never had problems with the SKF's HIGHLY recommended. Dunno how well they'd fare on the Ohlins though. SKF's are very low friction, so should be ok with nitride coatings I'd have thought? |
|
StorminBen
Moto3 racer Joined: 12 May 2019 Location: Solihull Status: Offline Points: 30 |
Post Options
Thanks(0)
|
Just for reference (in case anyone is interested) I went with the Yamaha seals and so far am impressed.
I had the Suzuki seals fitted previously and had been unhappy with what I thought was excessive high speed damping. After conversations with a friendly suspension guy the penny dropped a bit. It turns out that TiN coating is hard on fork seals because it is incredibly smooth, this means there are not as many microscopic grooves for oil to accumulate in. As a result the seals run drier than normal which can lead to stiction and increased wear I decided to try swapping out the seals but baulked at £50+ for Ohlins so went with the Yamaha seals 5VX-23145-00 These were originally listed for the 2006 R1-SP but further investigation shows they then became OEM for later R1s (2010 - 2013) Best bit - in stock at local Yamaha dealer and £14.99 for the pair!! Fitted them last night and decided to do a side by side comparison similar to the video above. And the results were . . . . . . . . very similar actually! Yamaha seals seem to move much freer and smoother than the GSX-r ones So back on the bike today and I'll see if the change is as noticeable as I hope Watch this space |
|
IanG
Premium Member Joined: 04 Oct 2010 Location: N Wales Status: Offline Points: 10725 |
Post Options
Thanks(0)
|
Not really strange when you consider that for many years Ohlins was wholly owned by Yamaha up until Kenth Ohlin bought it back under his control in 2007.
|
|
www.apworkshops.co.uk
www.apriliaforum.co.uk www.apriliaownersclub.co.uk Looking forward to the next track day |
|
Post Reply | Page 12> |
Tweet |
Forum Jump | Forum Permissions You cannot post new topics in this forum You cannot reply to topics in this forum You cannot delete your posts in this forum You cannot edit your posts in this forum You cannot create polls in this forum You cannot vote in polls in this forum |