rsvr.net Forums Homepage
Forum Home Forum Home > General Chat > General Chat
  New Posts New Posts RSS Feed - Link Plates and How They Effect Centre of Gravity
  FAQ FAQ  Forum Search   Events   Register Register  Login Login


Link Plates and How They Effect Centre of Gravity

 Post Reply Post Reply
Author
Message Reverse Sort Order
Lammy View Drop Down
Moto2 racer
Moto2 racer
Avatar

Joined: 21 Oct 2017
Location: Leicestershire
Status: Offline
Points: 175
Post Options Post Options   Thanks (0) Thanks(0)   Quote Lammy Quote  Post ReplyReply Direct Link To This Post Topic: Link Plates and How They Effect Centre of Gravity
    Posted: 07 Jan 2019 at 20:12
Originally posted by IanG IanG wrote:

Interesting topic Thumbs Up

Well done for being the first in ages to come up with something different and interesting Clap

Cheers! 
I've got loads more potential chunks of info and results for other things like this ready to go, just need to be able to do some measurements. But the rather boring weekend hours for this cold, damp time of year will be the time to do them. CoG height would be next most desired thang but thats tricky with a team at the best of times; gotta weigh the front when its on a surface around half a metre above the rear!
2008 Tuono 1000R in Orange
Back to Top
IanG View Drop Down
Premium Member
Premium Member
Avatar

Joined: 04 Oct 2010
Location: N Wales
Status: Offline
Points: 10725
Post Options Post Options   Thanks (0) Thanks(0)   Quote IanG Quote  Post ReplyReply Direct Link To This Post Posted: 07 Jan 2019 at 13:14
Interesting topic Thumbs Up

Well done for being the first in ages to come up with something different and interesting Clap
www.apworkshops.co.uk
www.apriliaforum.co.uk
www.apriliaownersclub.co.uk

Looking forward to the next track day
Back to Top
Lammy View Drop Down
Moto2 racer
Moto2 racer
Avatar

Joined: 21 Oct 2017
Location: Leicestershire
Status: Offline
Points: 175
Post Options Post Options   Thanks (0) Thanks(0)   Quote Lammy Quote  Post ReplyReply Direct Link To This Post Posted: 05 Jan 2019 at 13:57
I got some jack up link plates for my Tuono as a few extra mm for a bit more lean angle on the Fireblade stand, more room for my longer legs when at a stop and a bit of extra weight on the front all sounds marvellous. But to see if there really is much of a difference, it's time to break out my homemade spreadsheet (now now, stay with me, no dozing off!) and put some numbers to it rather than just feeling it. Besides, always good to know if you're going in the right direction.

Here is my very much budget method for CoG measurements: Digi bathroom scales, two bits of material the same height is the scale, a bit of wall for balance and for those who don't have a Debbie McGee to hand, a WiFi camera pointing at the scale readout with a phone resting on the dash so whilst sitting on the motorcycle, one can read the scale. Or just normal camera and video the readout. Easy!

The Tuono has around 14l of fuel in, is wet/ready to ride condition and potential mass effecting mods include the Akra pipes and offset footpegs. The suspension's preload is set good for me, the shock is standard length/non adjustable and the forks are on their 3rd ring through the top triple clamp. Wheelbase and geometry measurements are taken from online, probably more accurate than me trying to take dynamic measurements with a tape measure!

Each measurement was taken 3 times and mean averaged to allow for scale discrepancies etc, although all measurements were within ~1kg. I was just in winter civies, not kitted up as I have various bits of riding kit for various weather conditions so not really much consistency to add. And please ignore the vertical CoG numbers. They're for another bike as are some of the unimportant numbers for this exercise and I ain't gonna try and get those measurements in my garage, not yet anyway...

Anywho, the results:

OE set up with me aboard: Horizontal CoG 782.9mm from front axle centre, 44.478% front weight bias.


New jack up link plates with me aboard: Horizontal CoG 754.4mm front front axle centre, 46.495% front weight bias.



And the difference visualised. Yellow vertical line is OE horizontal CoG location. Green is the new CoG location resulting only from the link plates.

So an extra 2%/5.8kg on the front, a fair amount of difference in the direction desired. Hopefully I'll notice it come summer and it'll warm up the front a bit more vs the rear in the current weather we've got; seems cooler to the feel vs the rear after a ride without putting a chunky void between the front and rear tyre pressures. All in all, a couple hours well spent Tongue
2008 Tuono 1000R in Orange
Back to Top
 Post Reply Post Reply
  Share Topic   

Forum Jump Forum Permissions View Drop Down

Forum Software by Web Wiz Forums® version 12.03
Copyright ©2001-2019 Web Wiz Ltd.

This page was generated in 0.238 seconds.